FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Remove the handlebar post nut, bolt, washer and
handlebar post from the steering stem.
After '05 model Remove the stem cover.
only;
After '05 model
only:
INSTALLATION
Install the stem cover.
Install the handlebar post into the steering stem
while aligning the tab of the handlebar post with the
groove in the steering stem.
Install the bolt, washer and nut.
Tighten the nut to the specified torque.
TORQUE: 42 N m (4.3 kgf m, 31 Ibf-ft)
STEM COVER
14 J
13-18