LUBRICATION SYSTEM
Be careful not to Remove the bolts and oil pump from the crankcase. I
O |
. p i
J M
p
drop the bolts Into
the crankcase.
DISASSEMBLY
Remove the dowel pin, screw and oil pump cover.
SCREW
COVER
DOWEL PIN
Remove the oil pump outer rotor and inner rotor.
OUTER ROTOR
INNER ROTOR
INSPECTION
NOTE:
• Measure at several points and use the largest
reading to compare the service limit.
Temporarily install the outer, inner rotors and
T I P
driven gear into the oil pump body.
'
I K
Measure the tip clearance.
SERVICE LIMIT: 0.20 mm (0.008 in)
4-5