Honda Metropolitan CHF50 Service Manual page 17

FRAME
LOCATION
Front wheel dust seal lips
Speedometer gear teeth
Speedometer gear inner surface
Speedometer gear pinion shaft
Brake cams
Brake panel anchor pins
Front brake panel dust seal lips
Fork spring taper area
Fork rebound spring
Fork guide bushing inner surface
Fork dust seal lips
Fork dust seal-to-snap ring area
Throttle grip pipe flange cable groove
Brake lever pivots
Steering stem bearings and race sliding surface
Seat catch hook sliding area
Main stand pivot
Brake equalizer sliding surface
Front/rear brake cam felt seat
Rear axle nut threads and seating surface
Throttle cable outer inside
Brake cable outer inside
Seat lock cable outer inside
Main stand lock cable outer inside
Handlebar grip rubber inside
Air cleaner connecting tube-to-housing mating area
Equalizer cover bolt threads
GENERAL INFORMATION
MATERIAL
Multi-purpose
grease
Apply grease 3g.
Apply grease 0.2 – 0.3g.
Apply grease 6.5 – 8g.
Fill up 1.5 – 2g
Apply grease 0.1 – 0.2g.
Apply 1.5 – 2g per each bearing.
Silicone grease Apply 0.1g.
Engine oil
Cable lubricant
Honda bond A or
equivalent
Locking agent
REMARKS
1-13