Honda Metropolitan CHF50 Service Manual page 224

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Apply grease to the brake cam spindle.
Install the brake cam into the brake panel.
BRAKE CAM
Apply oil to the felt seal and install it into the brake
panel.
Install the return spring as shown.
Install the wear indicator onto the brake cam by
aligning its wide tooth with the wide groove in the
brake cam
Install the brake arm by aligning the punch marks
on the arm and brake cam.
Install the brake arm pinch bolt and nut as shown
and tighten it to the specified torque.
TORQUE: 6 N m (0.6 kgf-m, 4.3 Ibf-ft)
Apply grease to the speedometer gear and pinion
gear sliding surface.
Install the speedometer gear.
13-12