LIGHTS/METERS/SWITCHES
REMOVAL/INSTALLATION
Remove the following:
-
Front cover (page 2-4).
-
Front meter cover (page 2-12).
Remove the shield cover.
Disconnect the connectors and speedometer cable.
CONNECTORS
Disconnect the meter 6P and 3P connectors.
Remove the screws and speedometer.
Route the cables Installation is in the reverse order of removal.
and wire harness
properly
(page 1-14).
DISASSEMBLY
Remove the screw and rear meter cover.
SPEEDOMETER CABLE
6PCONNECTOR
SCREWS
REAR METER COVER
SCREW
II
18-10