REAR WHEEL/BRAKE/SUSPENSION
REAR WHEEL
INSPECTION
Check the wheel rim runout using dial indicators.
Actual runout is 1/2 the total indicator readings.
SERVICE LIMITS:
Radial: 2.0 mm (0.08 in)
Axial:
2.0 mm (0.08 in)
REMOVAL
Support the scooter securely on its centerstand.
Remove the muffler (page 2-13).
Remove the two bolts and rear inner fender.
Remove the rear axle nut, washer and rear wheel.
REAR INNER FENDER
1/
INSTALLATION
Install the rear wheel onto the final gear shaft, align-
ing the spline.
Install the washer onto the final gear shaft.
Apply oil to the threads and seating surface of the
rear axle nut.
Tighten the rear axle nut to the specified torque.
TORQUE: 118 N m (12.0 kgf-m, 87 Ibf-ft)
Install the muffler (page 2-13).
Install the rear inner fender and tighten the two
bolts securely.
14-4