FINAL REDUCTION
Install the clamp, bolt and tighten it to the securely.
Install the rear shock absorber lower mounting bolt
and tighten it to the specified torque.
TORQUE: 26 N m (2.7 kgfm, 20 Ibf-ft)
Install the brake cable into the transmission case
holder.
REAR SHOCK
ABSORBER LOWER
MOUNTING BOLT
CASE BOLT r *
CLAMP
Install the air cleaner housing and tighten the bolts
securely.
Install the crankcase breather drain hose into the
clamp.
Install the following:
-
Rear brake (page 14-7)
-
Rear wheel (page 14-4)
-
Clutch/driven pulley (page 9-18)
Fill the transmission case with the recommended oil
(page 3-10).
AIR CLEANER HOUSING MOUNTING BOLTS
BREATHER DRAIN HOSE '
10-12