LIGHTS/METERS/SWITCHES
DISCHARGE VOLUME INSPECTION
Remove the luggage box (page 2-6).
Disconnect the fuel hose from the carburetor.
Hold a graduated beaker under the fuel hose.
Turn the ignition switch to ON and engine stop
switch to " o " .
Let the fuel flow into the beaker for 5 seconds, then
turn the ignition switch to OFF.
Multiply the amount in the beaker by 12 to deter-
mine the fuel pump flow capacity per minute.
FUEL PUMP FLOW CAPACITY:
100 cm
3
(3.4 US oz, 3.5 Imp oz) minimum/minute
If the flow capacity is out of specification, replace
the fuel pump.
Install the luggage box (page 2-6).
REMOVAL/INSTALLATION
Remove the lower cover (page 2-10).
Disconnect the fuel pump 2P connector.
Disconnect the fuel hoses from the fuel pump.
Remove the bolt, nut, stay and fuel pump.
FUEL PUMP
FUEL HOSE
Installation is in the reverse order of removal.
STAY
18-18