Carburetor Assembly; Carburetor Cleaning - Honda Metropolitan CHF50 Service Manual

FUEL SYSTEM
Inspect each jet for wear or damage and replace if
necessary.
SLOW JET
MAIN JET
WASHER
PILOT SCREW
NEEDLE JET SPRING
CARBURETOR CLEANING
Remove the following:
- SE valve/throttle sensor
- Diaphragm/vacuum piston
- Float/float valve
- Main jet/needle jet/slow jet
- Pilot screw/spring/washer/O-ring
Cleaning the air and Blow open all air and fuel passages in the carbure-
fuelpassages with tor body with compressed air.
a piece of wire will
damage the
carburetor body.
CARBURETOR ASSEMBLY
THROTTLE
POSITION SENSOR
VACUUM CHAMBER COVER 9
L A M P
SPRING
JET NEEDLE A
HOLDER
W
NEEDLE
SPRING
JET NEEDLE
PILOT SCREW
DIAPHRAGM/
VACUUM PISTON
FLOAT PIN
FLOAT VALVE
NEEDLE JET
\f^"^ MAIN JET ~
SLOW JET
FLOAT
O-RING
FLOAT CHAMBER
SE VALVE COVER
SET PLATE
O-RING
SE VALVE
5-13