Omron NX701-17 Series User Manual page 97

Verified information
Number of slaves connected
Vendor ID
Product code
Revision
Serial number
*1 Options are available.
*2 Serial number verification is performed for all slaves in the EtherCAT topology. You cannot specify dif-
ferent verification methods for individual slaves. The default setting is No check.
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
5 Setting Up EtherCAT Communications with the Sysmac Studio
Required/optional
Required
Required
Required
Optional
*1*2
Optional
Number of slaves in the network
Vendor ID of each slave
Product code of each slave
*1 Revision number of each slave
Serial numbers of all slaves
Description
5-15
5