Omron NX701-17 Series User Manual page 107

Use the following procedure to compare and merge the network configuration settings on the Sysmac
Studio and the actual network configuration.
1
Start the Sysmac Studio and go online with the Controller.
2
Double-click EtherCAT under Configurations and Setup in the Multiview Explorer. Or, right-
click EtherCAT under Configurations and Setup and select Edit.
The Edit Pane is displayed.
3
Right-click the EtherCAT master that is displayed in the Edit Pane and select Compare and
Merge with Actual Network Configuration.
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
5 Setting Up EtherCAT Communications with the Sysmac Studio
5
5-25