Omron NX701-17 Series User Manual page 228

9 Troubleshooting
The diagnostic and statistical information for the master and slaves are displayed.
 Operation Button Functions
The following table describes the buttons to operate the diagnostic and statistical information.
Button
Get
Clear Master Diagnosis/Sta-
tistics Information
Clear Slave Diagnosis/Statis-
tics Information
Output File
*1 Only for the EtherCAT slaves that are registered in the network configuration information of the project.
*2 If the number of error frames exceeds 255, 255 is output.
Version Information
A CPU Unit with unit version 1.11 or later and Sysmac Studio version 1.15 or higher are required
to use the Clear Slave Diagnosis/Statistics Information Button.
9-58
Acquires the diagnostic and statistical information from the EtherCAT master
*1
and EtherCAT slaves and updates the display.
You can retain a maximum of 100 diagnostic and statistical data that you
acquired.
When the Display Diagnosis/Statistics Information Tab Page is closed, the
diagnostic and statistical information that you acquired are discarded.
Clears all values of the master diagnostic and statistical information to zeros.
Clears all values of the slave diagnostic and statistical information to zeros.
Outputs the diagnostic and statistical information to a CSV file in a specified
folder. The following data are output.
• Master diagnostic and statistical information
• Slave diagnostic and statistical information
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
Function
*2