Omron NX701-17 Series User Manual page 185

Event code Event name
94410000 hex Slave Con-
nected
94430000 hex Errors Reset
94440000 hex Slave Dis-
(Ver. 1.04 or abled
later)
94450000 hex Slave
(Ver. 1.04 or Enabled
later)
94500000 hex EtherCAT
(Ver. 1.11 or Diagno-
later) sis/Statistics
Log Started
94510000 hex EtherCAT
(Ver. 1.11 or Diagno-
later) sis/Statistics
Log Ended
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
Meaning Assumed cause
A slave was recon- • An operation to reconnect the
nected for a recon- slave was executed from the
nection command. Sysmac Studio.
• The EC_ConnectSlave instruc-
tion was executed.
A command was • An error reset operation was
received to reset performed from the Sysmac
errors. Studio.
• The ResetECError instruction
was executed.
The EtherCAT • The EC_ChangeEnableSetting
Slave was disabled. instruction was executed.
The EtherCAT • The EC_ChangeEnableSetting
Slave was enabled. instruction was executed.
EtherCAT diagno- • The value of the _EC_Statis-
sis/statistics log is ticsLogEnable system-defined
started. variable changed from FALSE
to TRUE.
EtherCAT diagno- • An error that causes EtherCAT
sis/statistics log is diagnosis/statistics log to end
ended. occurred.
9 Troubleshooting
Level
Maj Prt Min Obs Info
√ page 9-43
√
page 9-44
√ page 9-45
√
page 9-45
√
page 9-46
√ page 9-47
Reference
9
9-15