Specifications; Dimensions - IBM RS/6000 44P 270 Service Manual

FRU Name
I/O fan connector
CEC fan
connector
Operator panel
Operator panel
Connector
Power supply
Battery
Notes:
1. The physical location code for the PCI slots, when empty, uses the P1/Ix notation, where the
'/' identifies an integrated device (in this case the empty slot). A PCI device plugged into the
slot uses the P1-Ix notation, where the '-' identifies a plugged device.
2. The SCSI bus IDs are the recommended values. The SCSI IDs shown for media devices
indicate how the devices are set when they are shipped from the factory. Field installations
may not comply with these recommendations.

Specifications

The mechanical packaging, cooling, power supply, and environmental requirements for
the server are as follows:

Dimensions

v With pedestal:
– Height - 615 mm (24.2 inches)
– Depth - 681 mm (26.8 inches)
– Width - 340 mm (13.4 inches)
v Without pedestal:
– Height - 610 mm (24.0 inches)
– Depth - 681 mm (26.8 inches)
– Width - 221 mm (8.7 inches)
AIX Location Physical
Code Location Code
P2/F2
P2/F1
Operator Panel
L1
P2/L1
Power Supply
V1
Battery
V2
Physical Logical
Connection Identification
Fan connector J3
at system board
Fan connector
J21 at system
board
I/O board
connector J1
I/O board
connector J1
I/O board
connector J11
Chapter 1. Reference Information
17