IBM RS/6000 44P 270 Service Manual page 136

Rs/6000 44p series
Hide thumbs Also See for RS/6000 44P 270:
Table of Contents

Advertisement

Table 3. Firmware Error Codes. (continued)
118
Service Guide
Error Code Description
40111032 A high 3.3 V reading detected.
40111033 A high 2.5 voltage reading
detected.
40111052 A high +12 voltage reading
detected.
40111062 A high −12 voltage reading
detected.
40111072 A high +5 V standby voltage
reading detected.
40111082 A low 5.0 V reading detected.
40111092 A low 3.3 V reading detected.
40111093 A low 2.5 voltage reading
detected.
401110B2 A low +12 voltage reading
detected.
401110C2 A low −12 voltage reading
detected.
401110D2 A low +5 standby V reading
detected.
40111101 Power good signal low on the
processor card.
40111102 Wrong processor card plugged
into the system.
40111122 A high PCI + 5.0 voltage reading
detected.
40111132 A high PCI + 3.3 voltage reading
detected.
40111152 A high PCI + 12.0 voltage reading
detected.
40111162 A high PCI - 12.0 voltage reading
detected.
Action / Possible Failing FRU
1. Power supply
2. Replace the I/O board. (See note on
page 93.
1. Power supply
2. Processor card
1. Power supply.
2. I/O board. (See note on page 93.)
1. Power supply.
2. I/O board. (See note on page 93.)
1. Replace the I/O board. (See note on
page 93.
2. Power supply.
1. Power supply.
2. I/O board. (See note on page 93.)
1. Power supply.
2. Replace the I/O board. (See note on
page 93.
1. Power supply.
2. Processor card.
1. Power supply.
2. I/O board. (See note on page 93.)
1. Power supply.
2. I/O board. (See note on page 93.)
1. Power supply.
2. Replace the I/O board. (See note on
page 93.
1. Processor card. If the system is
running AIX look at the AIX error log
to see which processor card is
failing.
2. If the system is not running, look at
the service processor error log.
1. Remove processor card
2. Verify part number
3. Install valid card
1. Replace power supply
2. Replace I/O expansion board.
1. Replace power supply
2. Replace I/O expansion board.
1. Replace power supply
2. Replace I/O expansion board.
1. Replace power supply
2. Replace I/O expansion board.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7044-270

Table of Contents