Replacement Of Memory Cards - IBM RS/6000 44P 270 Service Manual

7. Remove the memory card by pullling it straight out of the system unit.

Replacement of Memory Cards

1. With one hand, touch any metal surface of the chassis to minimize static electrical
charges, and then pick up the memory card.
2. Open the camming latches.
3. Make sure that the camming latches are in the unlocked position.
4. If only one memory card is installed, it should be installed in the primary slot 1 (J3)
with the card face up.
5. If a second memory card is installed, it should be installed in the secondary slot 2
(J2) with the card face down.
Chapter 9. Removal and Replacement Procedures
233