IBM RS/6000 44P 270 Service Manual page 114

Table 3. Firmware Error Codes. (continued)
96
Service Guide
Error Code Description
20EE0006 No SCSI controllers present
20EE0007 Keyboard not found
20EE0008 No configurable adapters found in
the system.
20EE0009 Unable to communicate with the
service processor.
Action / Possible Failing FRU
The I/O board should always have (at
least) 2 integrated PCI SCSI controllers;
replace the I/O board. (See note on
page 93.)
1. Plug in keyboard.
2. Replace I/O board. (See note on
page 93.)
This warning occurs when the selected
SMS function cannot locate any
devices/adapters supported by the
function. If a supported device is
installed:
1. Replace the device or adapter.
2. Replace I/O board. (See note on
page 93.)
1. Replace I/O board. (See note on
page93
2. Replace system board.
3. Go to "MAP 1540: Minimum
Configuration" on page 71.