Modem Configuration Menu; Serial Port Selection Menu - IBM RS/6000 44P 270 Service Manual

Modem Configuration Menu

Two entries at the top of the Modem Configuration Menu display the status of the
current selections. Selections are made in the two sections labeled Modem Ports and
Modem Configuration File Name. Select the serial port that you want to activate and
then select the modem configuration file for the modem on the port. To set up both
serial ports with modems, make your selections one port at a time.
For information on choosing a modem configuration file, see "Sample Modem
Configuration Files" on page 293 and "Transfer of a Modem Session" on page 297.
Port 1 Modem Configuration File Name:
Port 2 Modem Configuration File Name:
To make changes, First select the port and then the configuration file
name
Modem Ports:
1. Serial port 1
2. Serial port 2
Modem Configuration File Name:
3. none
4. modem_f_sp
5. modem_f0_sp
6. modem_f1_sp
7. modem_z_sp
8. modem_z0_sp
30. Save configuration to NVRAM and Configure modem
98. Return to Previous Menu

Serial Port Selection Menu

This menu allows you to enable and/or disable the call-in functions of each serial port in
any combination.
1. Serial Port 1 Call-Out:
2. Serial Port 2 Call-Out:
3. Serial Port 1 Call-In:
4. Serial Port 2 Call-In:
98. Return to Previous Menu
168
Service Guide
Modem Configuration Menu
9. modem_m0_sp
10. modem_m1_sp
Serial Port Selection Menu
Currently Disabled
Currently Disabled
Currently Disabled
Currently Disabled