IBM RS/6000 44P 270 Service Manual page 184

The following is an example of the Memory Configuration/Deconfiguration Menu.
DIMMs on memory card number 0:
DIMMs on memory card number 1:
1. Configured by system (0x0)
98. Return to Previous Menu
Enter card number _and_ DIMM number separated by a space
1>
When the user selects a DIMM, its state toggles between configured and
deconfigured. Memory DIMMs that are not present are not shown.
Each memory DIMM can be in one of four states:
– Configured by system: The memory DIMM is present, and has not exceeded the
failure threshold. It has been configured by the system and is available.
– Deconfigured by system: The memory DIMM is present, but has exceeded the
failure threshold. It has been deconfigured by the system and is currently
unavailable.
– Manually configured: The memory DIMM is present and available. It has been
configured by the user through this menu.
– Manually deconfigured: The memory DIMM is present, but unavailable. It has
been deconfigured by the user through this menu.
v Enable/Disable CPU Repeat Gard Menu
Use this option to enable or disable cpu repeat gard.
v Enable/Disable Memory Repeat Gard Menu
Use this option to enable or disable memory repeat gard.
166
Service Guide
Memory Configuration/Deconfiguration Menu
2. Configured by system (0x0)