IBM RS/6000 44P 270 Service Manual page 119

Table 3. Firmware Error Codes. (continued)
Error Code Description
25A80100 NVRAM data validation check
failed.
25A80201 Unable to expand target partition
while saving configuration
variable.
25A80202 Unable to expand target partition
while writing error log entry.
25A80203 Unable to expand target partition
while writing VPD data.
25A80210 Setenv/$Setenv parameter error -
name contains a null character.
25A80211 Setenv/$Setenv parameter error -
value contains a null character.
Action / Possible Failing FRU
Turn off, turn on system unit and retry
the operation before replacing any
system component. Refer to Action
under error code 25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Refer to Action under error code
25A80xxx.
Chapter 5. Error Code to FRU Index
101