IBM RS/6000 44P 270 Service Manual page 188

Rs/6000 44p series
Hide thumbs Also See for RS/6000 44P 270:
Table of Contents

Advertisement

more information about the format and catcher computers, refer to the README file
in the AIX /usr/samples/syscatch directory.
v Customer Administration Center Telephone Number is the number of the system
administration center computer (catcher) that receives problem calls from servers.
Contact your system administrator for the correct telephone number to enter here.
v Digital Pager Telephone Number is the number for a pager carried by someone
who responds to problem calls from your server. Contact your administration center
representative for the correct telephone number to enter here. For test purposes, use
a test number, which you can change later.
Note: Some modems, such as IBM 7857-017, are not designed for the paging
For digital pagers that require a personal identification number (PIN) for access,
include the PIN in this field as shown in the following example:
18001234567,,,,87654
The commas create pauses for the voice response system, and the 87654
represents the PIN. The length of these pauses is set in modem register S8. The
default is usually 1 or 2 seconds each.
v Customer Voice Telephone Number is the telephone number of a phone near the
server or answered by someone responsible for the server. This is the telephone
number left on the pager for callback. For test purposes, use a test number, which
you can change later.
v Customer System Telephone Number is the telephone number to which your
server's modem is connected. The service or administration center representatives
need this number to make direct contact with your server for problem investigation.
This is also referred to as the call-in phone number.
170
Service Guide
function. Although they can be used for paging, they return an error message
when they do not get the expected response from another modem. Therefore,
even though the paging was successful, the error message causes the service
processor to retry, continuing to place pager calls for the number of retries
specified in the Call-Out policy Setup Menu. These retries result in redundant
pages.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7044-270

Table of Contents