Spin Delay - IBM RS/6000 44P 270 Service Manual

Spin Delay

Select this icon to change the spin-up delay for SCSI hard disk drives attached to your
system. Spin-up delay values can be entered manually or you can use a default setting.
All values are measured in seconds. The default is two seconds. After you have entered
the new spin-up delay values, use the arrow keys to highlight the Save icon and press
Enter.
<Hard Disk Spinup Delay>
Current Spin Up Value - 2
Enter New Value (>1)
(SEC)
Default
Save
Exit
199
Chapter 8. System Management Services