IBM RS/6000 44P 270 Service Manual page 215

Remote Mode
Remote Mode: The remote mode, when enabled, allows the system to
start from the defined boot device. This mode is ideal for network servers
and other system units that operate unattended. When the remote mode is
set, the icon label changes to Remote <On>
Note: To use the remote mode feature for booting unattended devices,
you must enable the unattended start mode. See the "System Power
Control Menu" on page 159 for instructions on enabling the unattended
start mode, which allows the system unit to turn on whenever ac power is
applied to the system (instead of having the system unit wait for the power
button to be pushed).
Privileged-Access Password
The privileged-access password protects against the unauthorized starting
of the system programs. Select the Set icon to set and verify the
privileged-access password.
When you select the Set icon, a screen with eight empty boxes displays.
Type your password in these boxes. You can use any combination of up to
eight characters (A-Z, a-z, and 0-9) for your password. As you type a
character, a key displays in the box.
Enter Password
Press Enter when you are finished; you must type the password again for verification.
Verify Password
Chapter 8. System Management Services
197