Replacement of Operator Panel
Perform the removal steps in the reverse order.
Attention: If you are replacing the operator panel with a new FRU, you must write the
Note: Refer to "Operator Panel Vital Product Data (VPD) Update Procedure" on
system VPD information (machine type, model number, and serial number).
You must contact the support center to obtain instructions and the
necessary password to enter the information into the VPD module. If you
type an incorrect serial number, the operator panel is rendered inoperable
and a new operator panel must be ordered.
page 262 for the correct procedure.
Chapter 9. Removal and Replacement Procedures
261