Display Configuration; Multiboot Menu - IBM RS/6000 44P 270 Service Manual

Display Configuration

This option provides information about the setup of your system unit. A screen similar to
the following is displayed.
Device Name
Power PC, POWER3 375 MHz
L2-Cache 4096K
Power PC, POWER3 375 MHz
L2-Cache 4096K
Memory
Memory card slot=1, module slot=1 size=128MB
Memory card slot=1, module slot=2 size=128MB
Service Processor
Tablet Port
LPT addr=378
COM addr=3F8
COM addr=2F8
Audio
Keyboard
Mouse
Diskette Drive addr=3F0
SCSI controller id=7
.-----------. .-----------.
|P=prev-page| |N=next-page|
`-----------' `-----------'

Multiboot Menu

Use this screen to view and set various options regarding the operating system and
boot sequence.
Multiboot Menu
1 Select Software
2 Software Default
3 Select Install Device
4 Select Boot Device
5 OK Prompt
6 Multiboot Startup
===>
Select Software: If this option is supported by the operating system, shows the name
of the operating system installed. This option may not be supported by all operating
systems.
210
Service Guide
.------.
|X=Exit|
`------'
.------.
|X=Exit|
`------'