Language Selection Menu
The service processor menus and messages are available in different languages. This
menu allows selecting languages into which service processor and system firmware
menus and messages are displayed.
1. English
2. Francais
3. Deutsch
4. Italiano
5. Espanol
6. Svenska
98. Return to Previous Menu
99. Exit from Menus
1>
Note: Your ASCII terminal must support the ISO-8859 character set to correctly display
Call-In/Call-Out Setup Menu
This menu is used to configure a modem for the service processor to use to support the
system.
1. Modem Configuration Menu
2. Serial Port Selection Menu
3. Serial Port Speed Setup Menu
4. Telephone Number Setup Menu
5. Call-Out Policy Setup Menu
6. Customer Account Setup Menu
7. Call-Out Test
8. Ring Indicate Power-On Menu
98. Return to Previous Menu
99. Exit from Menus
1>
v Modem Configuration Menu, see "Modem Configuration Menu" on page 168.
v Serial Port Selection Menu, see "Serial Port Selection Menu" on page 168.
v Serial Port Speed Setup Menu, see "Serial Port Selection Menu" on page 168.
v Telephone Number Setup Menu, see "Telephone Number Setup Menu" on
page 169.
v Call-Out Policy Setup Menu, see "Call-Out Policy Setup Menu" on page 171.
v Customer Account Setup Menu, see "Customer Account Setup Menu" on
page 172.
v Call-out Test, see "Call-Out Policy Setup Menu" on page 171.
v Ring Indicate Power-On Menu, see 159.
LANGUAGE SELECTION MENU
languages other than English.
CALL-IN/CALL-OUT SETUP MENU
Chapter 7. Using the Service Processor
167