Accessing System Programming Options - BT Versatility V16 Owner's Manual

BT Versatility
Owners Manual
Programming Reference

Accessing system programming options

System programming options can also be programmed via a standard system
Featurephone. However, the Featurephone must be connected to the extension that is
programmed to be the Programming Extension. By default, the Programming Extension
is Extension 20.
You access all system programming options via the Programme Key
Featurephone connected to Programming Extension.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
and Scroll Down
• Select 'System programming'. Selecting 'System programming' from any Extension
other than the programming Extension will result in the prompt 'Programming
refused' being displayed.
The following screen is displayed:
• Enter the System Programming Password, which is 1111 by default.
Note: You can also enter system programming by dialling ##1111 at the Programming Extension and
selecting 'Send digits'.
The following screen appears offering options to configure the overall system, the
extensions, or the Lines.
• Under 'System', you will find the programming options that affect the system as a whole.
• Under 'Extensions', you will find the programming options that affect the Extensions.
• Under 'Lines', you will find the programming options that affect the incoming Lines.
92
until 'System programming' is displayed. (The Scroll Up
Keys may be used to scroll between the various screens).
Enter system password
– Cancel
Select option
– System
– Extensions
– Lines
on the
.