To Programme Ddi Numbers With Names And Have Them Ring Extensions; To Programme Msn Numbers With Names And Have Them Ring Extensions; Multiple Call Handling - BT Versatility V16 Owner's Manual

BT Versatility
Owners Manual
Setting up and using ISDN

To programme DDI numbers with names and have them ring Extensions

If your switch is equipped with P-P Accesses then you programme DDI numbers.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Lines'.
• Press the Scroll Down Key
• Select an Index from 001-100. All currently programmed indices are also shown
• Enter the DDI telephone number (as supplied by your Network Provider). A total of
fifteen digits can be entered
• Select 'Confirm'.
• Enter a name as described on page 13 and press Confirm
• Select Day Mode, night mode or both.
• Select the Extension or Group the DDI Number is to call

To programme MSN numbers with names and have them ring Extensions

If your switch is equipped with P-MP Accesses then you programme MSN numbers.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Lines'.
• Press the Scroll Down Key
• Select 'MSN Programming'. Only Accesses programmed as P-MP appear in this menu.
• Select an Access.
• Indices 01-10 are presented for Access 1, Indices 11-20 for Access 2 up to Indices 71-80
for Access 8. Either select an entry or dial the index.
• Enter the MSN telephone number (as supplied by your Network Provider). A total of
fifteen digits can be entered
• Select 'Confirm'.
• Enter a name as described on page 13 and press Confirm.
• Select Day Mode, night mode or both.
• Select the Extension or Group the MSN Number is to call. The call can also be
answered by either Auto Attendant or Courtesy service by selecting the option at
this stage.
Press the Hands-free Key to finish programming.
Note: CLI Store routing will take precedence over MSN/DDI routing or normal call routing. Refer to
page 32 for information on CLI Store.

Multiple Call Handling

You can programme more than one MSN/DDI number to ring at an extension. If a call is
presented to your extension while you are on another call you will hear a Call Waiting tone,
provided your extension is programmed to receive Call Waiting tones. (See page 46).
84
until 'System programming' is displayed.
until 'DDI programming' is displayed.
until 'System programming' is displayed.
until 'ISDN programming' is displayed.
.
.