Programming Cds Detection; Programming Tone Dialling; Programming Disable Dialtone Detect - BT Versatility V16 Owner's Manual

BT Versatility
Owners Manual
Call Logging
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Lines'.
• Press the Scroll Down Key
• Select 'PSTN programming'.
• Press the Scroll Down Key
• Select 'Guarded clear' The lines with guarded clear programmed are indicated with a _.

Programming CDS Detection

On standard Analogue lines on the BT Versatility the 'CDS Detection' option is
programmed. The system can then detect when CDS information is being sent from the
network and display the number.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Lines'.
• Press the Scroll Down Key
• Select 'PSTN programming'.
• Press the Scroll Down Key
Select 'CDS Detection' The lines with 'CDS Detection' programmed are indicated
with a _.

Programming Tone Dialling

On standard Analogue lines on the BT Versatility the Tone dialling option is
programmed. The system sends digits dialled to the lines as tones rather than pulses.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Lines'.
• Press the Scroll Down Key
• Select 'PSTN programming'.
• Press the Scroll Down Key
Select 'Tone Dialling' The lines with guarded clear programmed are indicated with a _.

Programming Disable Dialtone Detect

This feature is provided as a programmable option under PSTN programming and is
enabled to prevent the system from dropping the line when dial tone has not been
detected. When enabled dial tone is not detected and the line is released if no digit is
dialled until the expiration of the 'Dialling time-out timer'.
80
until 'System programming' is displayed.
until 'PSTN programming' is displayed.
until 'Guarded clear' is displayed.
until 'System programming' is displayed.
until 'PSTN programming' is displayed.
until 'CDS Detection' is displayed.
until 'System programming' is displayed.
until 'PSTN programming' is displayed.
until 'Tone Dialling' is displayed.
.
.
.