Miscellaneous System Configuration Options; To Change The Programming Extension; To Change The System Programming Password; To Configure Unequipped Line Interfaces - BT Versatility V16 Owner's Manual

BT Versatility
Owners Manual
Call Logging

Miscellaneous system configuration options

To change the Programming Extension

System programming can only be carried out at one Featurephone, that is, the
Featurephone connected to the Programming Extension. By default, Extension 20 is the
Programming Extension. The Programming Extension can be changed to any other
Extension if required.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'System'.
• Select 'Programming position'.
• Select the Extension you wish to have as the Programming Extension. The selected
Programming Extension is denoted by a _.
Press the Hands-free Key to finish programming.

To change the System Programming Password

The default System Programming Password (1111) can be changed to any 4-digit
number.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'System'.
• Select 'Change password'.
• Select 'Change' and enter the 4-digit number you require.
• Select 'Confirm'.
Press the Hands-free Key to finish programming.

To configure unequipped Line interfaces

The system assumes that available Line interfaces have exchange lines connected to
them. If a line interface does not have an exchange line connected ensure correct system
operation by unequipping the line interface in system programming, as follows:
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Lines'.
• Press the Scroll Down Key
• Select 'Equipped lines'.
• Select the lines you wish to equip or unequip. Equipped lines are denoted by a _.
Unequipped lines are denoted by a ◊.
Press the Hands-free Key to finish programming.
74
until 'System programming' is displayed.
until 'System programming' is displayed.
until 'System programming' is displayed.
until 'Equipped Lines' is displayed.
.
.
.