To Configure Disconnected Extensions; To Examine System Passwords; To Configure Line Key Lights - BT Versatility V16 Owner's Manual

To configure disconnected Extensions

The system assumes that all available extension interfaces have devices connected to
them. If an extension interface does not have a device connected, ensure correct system
operation by disconnecting the extension interface in system programming, as follows
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Extensions'.
• Press the Scroll Down Key
• Select 'Extension disconnect'.
• Select the Extensions you wish to connect or disconnect. Disconnected Extensions are
denoted by a _.
Press the Hands-free Key to finish programming.
Note: When a Featurephone is connected to an extension interface that is programmed as disconnected, the
Featurephone Display may appear as if the Featurephone is connected. However, when the handset is lifted
a busy tone is heard and no options will be displayed.

To examine system passwords

• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Extensions'.
• Press the Scroll Down Key
• Select 'Examine passwords'.
• Select either 'Extension lock password', or 'Voicemail password', or 'System VM box'.
• If you selected 'Extension lock password', the Extension menu will appear. Select an
extension and its Extension Lock Password will appear on the Display.
• If you selected 'Voicemail password', the Extension menu will appear. Select an
extension and its Voicemail Password will appear on the Display.
• If you selected 'System VM box', the System Voicemail box Password appears on
the display.
Press the Hands-free Key to finish programming.

To configure Line Key Lights

When a call is placed on System Hold, you can decide if the associated Line Key Light is
to flash or remain steady on all other Featurephones. The default setting is that the light
flashes.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'System'.
• Press the Scroll Down Key
• Select 'Line key light'
• Choose either 'Light flashing on hold' or 'Light steady on hold'.
Press the Hands-free Key to finish programming.
until 'System programming' is displayed.
until 'Extension disconnect' is displayed.
until 'System programming' is displayed.
until 'Examine passwords' is displayed.
until 'System programming' is displayed.
until 'Line key light' is displayed.
Owners Manual
Call Logging
.
.
.
BT Versatility
75