To Prevent Calls From Individual Extensions Being Logged; To Set The Call Logging Interface Speed For Connecting A Printer Or Pc; External Diversion Options - BT Versatility V16 Owner's Manual

BT Versatility
Owners Manual
Call Logging

To prevent calls from individual Extensions being logged

If Call Logging is enabled, then by default all calls from all extensions will be logged.
However individual extensions can be programmed to prevent their calls being logged.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Extensions'.
• Press the Scroll Down Key
• Select 'No call logging'.
• Select the Extensions whose calls are not to be logged. The selected Extensions will
be indicated with a _.
Press the Hands-free Key to finish programming.

To set the call logging interface speed for connecting a Printer or PC

• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'System'.
• Press the Scroll Down Key
• Select 'Set v24 baud rate'.
• Select the speed you require – 4800, 9600,19,200, 38,400 or 115,200 bps.
Press the Hands-free Key to finish programming.
Note: To connect a printer or PC for call logging, use the call logging interface module and cable provided and
connect one end to the V24 interface on the CCU and the other end to the serial device, e.g. a PC or a printer.

External diversion Options

This allows you to decide if External callers or External and internal Callers to your
extension are diverted externally if you have set an external divert. It also allows
extensions to be prohibited from activating an external diversion.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Extensions'.
• Press the Scroll Down Key
• Select 'External diversion'.
• Select 'No trunk to trunk calls'.
• Select the extensions that are not allowed to activate an external diversion or set up
trunk to trunk calls.
If both internal and external calls are to be diverted select 'All calls'.
If external calls only are to be diverted select 'External calls only'.
72
until 'System programming' is displayed.
until 'No call logging' is displayed.
until 'System programming' is displayed.
until 'Set v24 baud rate' is displayed.
until 'System programming' is displayed.
until 'External Diversion' is displayed.
.
.
.