Least Cost Routing; To Set Up Codes To Allow Calls To Be Routed On Specific Lines Or Networks - BT Versatility V16 Owner's Manual

BT Versatility
Owners Manual
Additional call features
• Select 'Key programming'.
• Select the key you want to programme.
• Press the Scroll Down Key
• Select 'Divert all calls'.
• Select 'Enter data' and enter the Secretary's Extension number
• Select 'Confirm'.
Press the Hands-free Key to finish programming.

Least Cost Routing

You may use this feature to have users' calls routed over specific lines, or over a specific
Network Provider. To set the feature up you associate input codes with the lines over
which calls should be routed and with whatever network codes are necessary to route
the call.
In addition, you can choose to route the calls over different lines at various times of the day
for optimum call rates. Once the facility is activated calls are automatically routed over the
selected lines, and the network code is sent to the line before the telephone number.

To set up codes to allow calls to be routed on specific Lines or networks

• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Lines'.
• Scroll Down and select 'LCR Codes'.
• Select LCR On to activate the facility
• Enter in a code index (01-50).
• Enter an input code (Up to 5 digits). Press Confirm. This is the code dialled by the user.
• Enter an Output Code (Up to 9 digits). This is the code that will be inserted before the
telephone number that the user dials. This code can be used to select a specific
Network Provider.
• Select the preferred or exclusive option.
If 'Exclusive' is selected the calls can only be sent on the lines selected below.
If 'Preferred' is selected the calls will be routed on any available Line, if none of the
selected lines are available. In this case the output code is not dialled.
Note: When Enabling or Disabling the LCR feature the new setting does not take immediate affect.
There can be a delay of up to 1 minute for the setting to take affect.
Least cost Routing activated automatically at set times
You can programme the Least Cost Routing facility, to be automatically turned on and off
twice during a 24-hour period enabling you to tailor your call charges through different
service providers.
• From the Programming Extension, press the Programme Key
• Press the Scroll Down Key
• Select 'System programming'.
• Enter the System Programming Password and select 'Lines'.
38
until 'Divert all calls' is displayed.
until 'System programming' is displayed.
until 'System programming' is displayed.
.
.