Symmetricom TimeProvider 1100 Reference Manual page 98

Chapter 2 TL1 Command Syntax and Description
Retrieve Craft Data (RTRV-CRAFT)
Table 2-16. RTRV-CRAFT Output Fields (Continued)
Field
maxpoll The maximum time (in seconds) between Server time requests.
16 | 32 | 64 | 128 | 256 | 512 | 1024
preferred The Preferred Server setting.
YES | NO
Example
To display all current state, status, and provisioning information:
Input
RTRV-CRAFT:::TP1000;
Response Example
TP-SSU 05-02-10 13:37:39
M TP1000 COMPLD
"SYS:PWRA-OK,PWRB-OK,EXP-OK,EXT1-OK,EXT2-OK,IOC1-EQPT,IOC2-EQPT,1,05-02-02,
15-53-10,PRR,AUTO,GPS,5,5,0,ENABLE"
"IMC:IOC1COMM-OK,IOC2COMM-OK"
"COML:9600,NONE,DISABLE"
"COMR:9600,NONE,DISABLE"
"COMI:192.168.21.46,192.168.21.1,255.255.255.0,DISABLE"
"IOC1:OK,IOC1TO2COMM-OK,IMC1COMM-OK,INSRV,ACTIVE,LOCKED,TYPEI"
"IOC2:OK,IOC2TO1COMM-OK,IMC2COMM-OK,OOSRV,STANDBY,,ST2"
"GPS:OK,ENABLE,1,1,05-02-03,17-18-34,AUTO,30-28-8.39N,97-40-35.21W,266.4,10"
"PRS:OK,ENABLE,2,1,2M"
"INP1:ALM,ENABLE,2,1,2M,E1,2,DISABLE,DISABLE,8"
"INP2:ALM,ENABLE,2,1,2M,E1,2,DISABLE,DISABLE,8"
"OUTA:OK,DISABLE,2M,ON,ON"
"OUTB:OK,DISABLE,2M,SQUELCH,ON"
"OUTC:OK,ENABLE,2M,SQUELCH,ON"
"OUTD:OK,ENABLE,CC,ON,ON"
"RTMA-1:OK,ENABLE,0,RETIME,RETIME,ON"
"RTMA-2:OK,ENABLE,0,RETIME,RETIME,ON"
"RTMB-1:OK,ENABLE,2,RETIME,RETIME,ON"
"RTMB-2:OK,ENABLE,2,RETIME,RETIME,ON"
"RTMC-1:UNEQUIPPED,DISABLE,2,CUTTHRU,CUTTHRU,ON"
"RTMC-2:UNEQUIPPED,DISABLE,2,CUTTHRU,CUTTHRU,ON"
"RTMD-1:UNEQUIPPED,DISABLE,2,CUTTHRU,CUTTHRU,ON"
"RTMD-2:UNEQUIPPED,DISABLE,2,CUTTHRU,CUTTHRU,ON"
"E422A:OK,DISABLE,2M,SQUELCH,ON"
"E422B:OK,DISABLE,2M,SQUELCH,ON"
"E422C:OK,DISABLE,2M,SQUELCH,ON"
"E422D:OK,DISABLE,2M,SQUELCH,ON"
"NTP:AUTHENTICATION,ENABLE"
"NTP:SERVER,254.255.255.254,0,16,1024,NO"
;
Autonomous Message
None
98 TimeProvider TL1 Reference Guide
Description
097-58001-01 Revision E – September 2006