Symmetricom TimeProvider 1100 Reference Manual page 157

Appendix C Events
This appendix lists all events and describes the possible cause.
events and descriptions and
descriptions.
Table C-1. Event Identifiers
Event ID
or Event Description
CONDTYPE
ACCLVL The user 's system
access level has
changed in the database
ACO Audio Alarm was
deactivated
ALMCHG The IMC alarm
parameters have been
changed
AOMERGE Enable/Disable
autonomous event
generation for the current
session.
BAUD The IMC serial port baud
rate has changed
CMDCHG The command access
level was changed
ECHO The communication
session's echo setting
has changed
FEATURE A System feature has
been enabled
097-58001-01 Revision E – September 2006
Table C-2 is a list of event code conditional
AID
Default Value
TYPE
IMC Event Codes
EQPT SECURITY –
when no users
have been
assigned to the
system
EQPT NA
EQPT NA
EQPT ENABLE
EQPT 9600
EQPT ACCLVL=USER NONE | USER | ADMIN |
EQPT DISABLE
EQPT NTP
Table C-1
Value Description
NONE – user has no access
USER – user can access user
level commands
ADMIN – user can access admin
level commands
SECURITY – user can access
security level commands
NA
Alarm Keywords and Values are
shown in Appendix B,
When a Value is changed, the
ALMCHG event is generated and
the keyword and value is
displayed.
ENABLE – Enables the
autonomous messages to be
displayed in the current session.
DISABLE – Disables the
autonomous messages from being
displayed in the current session.
2400 | 9600 | 19200 | 38400 |
57600 | 115200
SECURITY
ENABLE – User keystrokes
are echoed
DISABLE – User keystrokes
are not echoed
The NTP feature has been
enabled.
TimeProvider TL1 Reference Guide 157
is a list of
Alarms.