Symmetricom TimeProvider 1100 Reference Manual page 171

Table C-2. Event Code Condition Descriptions (Continued)
Event ID
SSMENA OUTPUT GENERATION OF SSM HAS CHANGED, <value>
CKTIDCHG OUTPUT CIRCUIT ID HAS CHANGED, <cktid>
FREEFLT FREE-RUN OUTPUT FAULT STRATEGY HAS CHANGED, <state>
FRMTYPE OUTPUT FRAMING TYPE HAS CHANGED, <value>
HOLDFLT HOLDOVER OUTPUT FAULT STRATEGY HAS CHANGED, <state>
OUTSTATE OUTPUT GROUP STATE HAS CHANGED, < value >
AUTHEN NTP AUTHENTICATION, <state>
KEYGEN NTP AUTHENTICATION HAS CHANGED
SERVER NTP SERVER CONFIGURATION HAS CHANGED
BRDGTIM BRIDGING TIME HAS CHANGED, <value>
CLRDELAY INPUT CLEAR DELAY HAS CHANGED, <value>
DATCHG SYSTEM DATE HAS CHANGED, <date>
ELEVTIME ALARM ELEVATION TIME HAS CHANGED, <state>
FACTORY PROVISIONED TO FACTORY DEFAULTS
FLTDELAY INPUT FAULT DELAY HAS CHANGED, <value>
INACTTIME COMMUNICATION TIMEOUT HAS CHANGED, <value>
INPREF SYSTEM REFERENCE INPUT HAS CHANGED, <selected reference>
LOCTIM SYSTEM'S LOCAL TIME OFFSET HAS CHANGED, <time offset>
LOGECHO RECORD LOGIN EVENT,<value>
REFMODE SYSTEM REFERENCE MODE HAS CHANGED, <mode>
TIMCHG SYSTEM TIME HAS CHANGE, <time>
SYSMODE SYSTEM MODE OF OPERATION HAS CHANGED, <state>
UTC GPS HAS SET SYSTEM TIME TO UTC, <UTC date, UTC time>
CKTIDCHG RETIMER CIRCUIT ID HAS CHANGED, <cktid>
FREEFLT FREE-RUN OUTPUT FAULT STRATEGY HAS CHANGED, <state>
097-58001-01 Revision E – September 2006
Event Condition Description
EIA-422 Output Event Conditions
NTP Event Conditions
SYS Event Conditions
Retimer Event Conditions
Appendix C Events
TimeProvider TL1 Reference Guide 171