Symmetricom TimeProvider 1100 Reference Manual page 145

Table B-1. Alarms (Continued)
Alarm ID
Alarm Condition
or
Description
CONDTYPE
CLKHOLD The local oscillator on
the specified IOC is in
Holdover Mode.
CLKFREE The local oscillator on
the specified IOC is in
Free-run mode.
CLKWARM The local oscillator on
the specified IOC is in
Warm-up mode.
SYNTHEOR The synthesizer
generating the modules
stable output frequency
has reached the defined
End-of-Range for the
type of oscillator used
on the IOC.
IMC2COMM A communication alarm
with the IMC module
and IOC2 module.
IOC2TO A communication alarm
1COMM from IOC2 module to
IOC1 module.
IOCFAIL A summary alarm for
IOC BIST faults.
BTBCKUP All BesTime Backup
sources, inputs are
unusable to the
BesTime engine.
CLKBRDG The local oscillator on
the specified IOC is in
Bridging Mode.
CLKHOLD The local oscillator on
the specified IOC is in
Holdover Mode.
CLKFREE The local oscillator on
the specified IOC is in
Free-run mode.
097-58001-01 Revision E – September 2006
Error
AID Service
Delay
Type Affecting
Default
EQPT SA IMMED
EQPT SA IMMED
EQPT SA IMMED
EQPT SA IMMED
<aid> = IOC2
EQPT NSA IMMED
EQPT NSA IMMED
EQPT SA IMMED
EQPT NSA IMMED
EQPT NSA FLT
DELAY
EQPT SA IMMED
EQPT SA IMMED
Appendix B Alarms
Alarm Default
Error
Level
Delay
Editable
SSU PRS SUB
NO MJ MJ
NO MJ MJ
NO MN MN
NO MJ MJ
NO MN MN
NO MN MN
NO MJ MJ
NO NA NA
NO NA NA
NO MJ MJ
NO MJ MJ
TimeProvider TL1 Reference Guide 145
MJ
MJ
MN
MJ
MN
MJ
NA
NA
MJ
MJ