Error Response; Normal Response Fields; Error Response Fields - Symmetricom TimeProvider 1100 Reference Manual

Table 1-1. Normal Response Fields
Field
sid The unit's Source Identifier (SID), which identifies the specific TimeProvider unit
within the synchronization network. The unit's SID is set using the SET-SID TL1
command.
date The date of the response, in the format YY-MM-DD, where YY is the 2-digit year, MM
is the 2-digit representation of the month, and DD is the day of the month.
time The time of the response, in the format HH:MM:SS, where HH is the hour in 24-hour
format, MM is the minutes, and SS is the seconds.
ctag The correlation tag that was sent as part of the TL1 command string. If the value for
the ctag is null in the command string, the unit returns a zero ( 0 ) as the ctag in the
response.
textblk A double-quoted message containing less than 4 kBytes of information that the unit
returns in response to the command.
LG_textblk If the unit responds with a message containing more than 4 kBytes of information, the
message is divided into records of approximately 4 kBytes, each ending with
COMPLD<cr><lf>. The last record ends with <cr><lf>;.

Error Response

The TimeProvider sends an Error response when a command is mis-typed, an
invalid command is issued, or some other operator error is performed. The format of
an Error response is as follows. Note that M and DENY identify the response as an
Error response:
<cr><lf><lf>
sid date time<cr><lf>
M ctag DENY<cr><lf>
errcde<cr><lf>
;
Table 1-2 explains each field that is contained in the Error response.
Table 1-2. Error Response Fields
Field
sid The unit's Source Identifier (SID), which identifies the specific TimeProvider unit
within the synchronization network. The unit's SID is set using the SET-SID TL1
command.
date The date of the response, in the format YY-MM-DD, where YY is the 2-digit year, MM
is the 2-digit representation of the month, and DD is the day of the month.
time The time of the response, in the format HH:MM:SS, where HH is the hour in 24-hour
format, MM is the minutes, and SS is the seconds.
097-58001-01 Revision E – September 2006
Description
Description
TimeProvider TL1 Reference Guide
Chapter 1 TL1 Overview
Responses
17