Symmetricom TimeProvider 1100 Reference Manual page 33

TP-SSU 05-03-09 21:02:49
A 462 REPT EVT
"IOC2,EQPT:IOCMODE,TC,05-03-09,21-02-49,,,,:\"IOC MODE IS, ACTIVE\""
;
TP-SSU 05-03-09 21:02:49
A 463 REPT EVT
"IOC1,EQPT:IOCMODE,TC,05-03-09,21-02-49,,,,:\"IOC MODE IS, STANDBY\""
;
TP-SSU 05-03-09 21:06:06
A 464 REPT EVT
"IOC,EQPT:FWOK,TC,05-03-09,21-06-06,,,,:\"FIRMWARE UPGRADE SUCCESSFUL\""
;
TP-SSU 05-03-09 21:06:08
M 0 COMPLD
;
TP-SSU 05-03-09 21:06:11
A 465 REPT EVT
"IOC1,EQPT:RESET,TC,05-03-09,21-06-10,,,,:\"MODULE HAS BEEN RESET\""
;
Example 4
In this example, the ACT-SWDL command is issued to transfer a firmware file to the
IOC1 module from the IOC2 module and the download and upgrade is successful:
Input
ACT-SWDL::IOC1:TP1000;
Response Example
ACT-SWDL::IOC1:TP1000;
TP-SSU 05-03-09 14:36:09
A 15 REPT EVT
"IOC,EQPT:FWLOAD,TC,05-03-09,14-36-09,,,,:\"BEGINNING FIRMWARE UPGRADE\""
;IP TP1000
<
TP-SSU 05-03-09 14:39:35
A 16 REPT EVT
"IOC1,EQPT:RESET,TC,05-03-09,14-39-34,,,,:\"MODULE HAS BEEN RESET\""
;
TP-SSU 05-03-09 14:39:37
A 18 REPT EVT
"IOC,EQPT:FWOK,TC,05-03-09,14-39-37,,,,:\"FIRMWARE UPGRADE SUCCESSFUL\""
;
TP-SSU 05-03-09 14:39:38
M TP1000 COMPLD
;
097-58001-01 Revision E – September 2006
Chapter 2 TL1 Command Syntax and Description
The Firmware Download Process
TimeProvider TL1 Reference Guide 33