Symmetricom TimeProvider 1100 Reference Manual page 97

Table 2-16. RTRV-CRAFT Output Fields (Continued)
Field
rtmstatus The current status of the specified Retimer group and port.
OK | ALM | UNEQUIPPED
rtmstate The state of the specified Retimer group and port.
ENABLE | DISABLE
rtmlbo The line buildout for the specified Retimer group and port.
0 | 1 | 2 | 3 | 4
freeflt The type of signal to be generated on the specified Retimer group and port when the
Local Oscillator enters Free-run mode.
RETIME | CUTTHRU
holdflt The type of signal to be generated on the specified Retimer group and port when the
Local Oscillator enters Holdover mode.
RETIME | CUTTHRU
rtmslip The number of slips permitted in a 24-hour period.
0 | 1 | ... | 255
outstatus The current status of the specified EIA-422 output group.
OK | ALM | UNEQUIPPED
outstate The state of the specified EIA-422 output group.
ENABLE | DISABLE
frmtype The framing type that the specified EIA-422 output group is provisioned to generate.
1.544MHz | 2M
freeflt The type of signal to be generated on the specified EIA-422 output group when the
Local Oscillator enters Free-run mode.
ON | SQUELCH
holdflt The type of signal to be generated on the specified EIA-422 output group when the
Local Oscillator enters Holdover mode.
ON | SQUELCH
authen Displays the NTP configuration.
ENABLE | DISABLE
serverip# The IP address of NTP server #.
keyid The Authentication Identification value:
0 | 1 | ... | 32768
minpoll The minimum time (in seconds) between Server time requests.
16 | 32 | 64 | 128 | 256 | 512 | 1024
097-58001-01 Revision E – September 2006
Description
<aid> = RTMg-p
<aid> = E422g
<aid> = NTP:AUTHENTICATION
<aid> = NTP:Server
Chapter 2 TL1 Command Syntax and Description
Retrieve Craft Data (RTRV-CRAFT)
TimeProvider TL1 Reference Guide 97