Symmetricom TimeProvider 1100 Reference Manual page 159

Table C-1. Event Identifiers (Continued)
Event ID
or Event Description
CONDTYPE
LOGECHO Allows the system to be
configured to echo the
login or logout events.
LOGIN A user has logged into
the system
LOGOUT A user has logged out of
the system
NTP A user has changed the
NTP configuration
PIDCHG The user 's password
was changed in the
database
RESET When the IMC is
commanded to reset, it
generates an event
indicating that it is being
restarted.
SIDCHG The system's source
identification was
changed in the database
UIDCHG The user 's name was
changed in the database
USRADD The IMC user database
was changed to add a
user.
USRDEL No users defined in the
user database.
USRDEL The user database was
changed to delete a user.
XFERFAIL The transfer of the IMC
Istate to the IOC was
unsuccessful. The
transfer of IOC Istate to
the IMC was
unsuccessful. The
transfer of IOC Istate to
the redundant IOC was
unsuccessful.
097-58001-01 Revision E – September 2006
AID
Default Value
TYPE
EQPT ENABLE
EQPT NA
EQPT NA
EQPT NA
EQPT pid
EQPT NA
EQPT NA
EQPT uid
EQPT uid
pid
uap
EQPT NA
EQPT uid
EQPT NA
Appendix C Events
Value Description
ENABLE – Echo the
login/logout events
DISABLE – Do not echo the
login/logout events
NA
NA
NA
User password – up to 20
alphanumeric characters
NA
20 character name used to identify
the network element
uid – User name can be up to 20
characters
uid – Assigned user name
pid – Assigned user password
uap – Assigned user access
level
NA
uid – Username
NA
TimeProvider TL1 Reference Guide 159