Symmetricom TimeProvider 1100 Reference Manual page 144

Appendix B Alarms
Table B-1. Alarms (Continued)
Alarm ID
Alarm Condition
or
Description
CONDTYPE
IOC2EQPT IOC2EQPT indicates that
the IOC was physically
inserted or removed from
the system.
EXPNEQPT The Expansion Panel
was physically inserted or
removed from the
system.
IOC1COMM A communication alarm
with either of the IOC1
modules.
IOC2COMM A communication alarm
with either of the IOC2
modules.
IMCFAIL A summary alarm of
IMC BIST faults
IMCTCPIP TCP/IP activity is
excessive; a DoS attack
could be in progress
IMC1COMM A communication alarm
with the IMC module
and IOC1 module.
IOC1TO2 A communication alarm
COMM from IOC1 module to
IOC2 module.
IOCFAIL A summary alarm for
failures of the IOC
hardware that are not
specified in other alarms.
BTBCKUP All BesTime Backup
sources, inputs are
unusable to the
BesTime engine.
CLKBRDG The local oscillator on
the specified IOC is in
Bridging Mode.
144 TimeProvider TL1 Reference Guide
Error
AID Service
Delay
Type Affecting
Default
EQPT NSA IMMED
EQPT NSA IMMED
<aid> = IMC
EQPT NSA IMMED
EQPT NSA IMMED
EQPT SA IMMED
EQPT SA IMMED
<aid> = IOC1
EQPT NSA IMMED
EQPT NSA IMMED
EQPT SA IMMED
EQPT NSA IMMED
EQPT NSA IMMED
Alarm Default
Error
Level
Delay
Editable
SSU PRS SUB
NO MJ MJ
NO MJ MJ
NO MN MN
NO MN MN
NO MJ MJ
NO MN MN
NO MN MN
NO MN MN
NO MJ MJ
NO NA NA
NO NA NA
097-58001-01 Revision E – September 2006
MJ
MJ
MN
MN
MJ
MN
MN
MN
MJ
NA
NA