Symmetricom TimeProvider 1100 Reference Manual page 88

Chapter 2 TL1 Command Syntax and Description
Retrieve Condition (RTRV-COND)
Parameter
<aid>
(cont'd)
Command Output
The following shows the output format of the command when the "ALL" aid is used,
and Table 2-15
Response Format
<cr><lf><lf>
sid date time<cr><lf>
M ctag COMPLD<cr><lf>
SYS:<pwra>,<pwrb>,<expneqpt>,<extfault>,<ioc1eqpt>,
"
<ioc2eqpt>,<sysqlevel> <lastdat>,<lasttim>
IMC:<ioc1comm>,<ioc2comm>
"
[ IOC1:<iocstatus>,<ioccomm>,<imccomm>
"
[ IOC2:<iocstatus>,<ioccomm>,<imccomm>
"
GPS:<gpsstatus>
"
PRS:<prsstatus>
"
INP1:<inpstatus>
"
INP2:<inpstatus>
"
OUTA:<outstatus>
"
OUTB:<outstatus>
"
OUTC:<outstatus>
"
OUTD:<outstatus>
"
RTMA:<rtm1status>,<rtm2status>
"
RTMB:<rtm1status>,<rtm2status>
"
RTMC:<rtm1status>,<rtm2status>
"
RTMD:<rtm1status>,<rtm2status>
"
E422A:<outstatus>
"
E422B:<outstatus>
"
E422C:<outstatus>
"
E422D:<outstatus>
"
;
88 TimeProvider TL1 Reference Guide
Value
RTMg Retrieves status of the Retimer group specified by g.
g = "A" for the group marked "A" on the main shelf
g = "B" for the group marked "B" on the main shelf
g = "C" for the group marked "C" on the main shelf
g = "D" for the group marked "D" on the main shelf
Note: This information is reported by the active IOC.
E422g Retrieves status of the EIA-422 output group specified by g.
g = "A" for the group marked "A" on the main shelf
g = "B" for the group marked "B" on the main shelf
g = "C" for the group marked "C" on the main shelf
g = "D" for the group marked "D" on the main shelf
Note: This information is reported by the active IOC.
explains the various fields in the command output:
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
Description
<cr><lf>
"
<cr><lf>
<cr><lf>]
"
<cr><lf>]
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
<cr><lf>
"
097-58001-01 Revision E – September 2006