Draytek Vigor3900 User Manual page 408

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Source IP Object
Source IP Group
Time Object
Time Group
Allow auto
adjustment...
Default TX/RX Limit
Enable Smart
Bandwidth Limit
Session Threshold
TX Limit
RX Limit
Apply
Cancel
Display the source IP object profile name.
Display the source IP group profile name.
If no time schedule is set, None will be shown in this field.
Display the Time group profile selected for such application
profile.
Check this box to make the best utilization of available
bandwidth.
The default limit will apply to LAN IP(s) not in the above
configuration profiles
Default TX Limit – Define the limitation for the speed of
the upstream.
Default RX Limit –Define the limitation for the speed of
the downstream.
Check this radio button to configure the default limitation
for bandwidth for any LAN IP not included in the
Limitation List.
When session number exceeds the set threshold, Smart
Bandwidth limit will work.
Define the speed of the upstream for Smart Bandwidth
Limit. If you do not set the limit in this field, the system will
use the default speed for the data transmission.
Define the speed of the downstream for Smart Bandwidth
Limit. If you do not set the limit in this field, the system will
use the default speed for the data transmission
Click it to save and exit the dialog.
Click it to discard the settings configured in this page.
400 Vigor3900 Series User's Guide