Vigor3900 Series User's Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Item
Packet Inspection
Packets Number
Apply
Cancel
After finished the above settings, click Apply to save the configuration.
Description
box to make the outgoing packets processed by Port
Redirection/DMZ passing through Vigor router's
firewall.
Block All Incoming Traffic – Check the box to block
all of the incoming packets.
Enable Syslog – Check the box to make related
information for the blocked packets being recorded in
Syslog.
The above three policies also can be configured in
Firewall>>Filter Setup>>IP Filter/Application Filter.
Disable – No inspection will be performed.
Enable – Packet inspection will be performed.
If Packet Inspection is enabled, choose a packet number for
filtering. Available settings are from 4 to 16. For example,
"8" is selected as packet number setting. It means only the
former 8 packets will be filtered and inspected by Firewall
rule. Others are allowed to pass through without any
inspection.
Click it to save the configuration.
Click it to discard the settings configured in this page.
215