Draytek Vigor3900 User Manual page 205

Vigor3900 Series User's Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Limit Packets When you choose Connection Limit as Action, you have to
configure limit packets number to determine how many
packets per second will be passed through.
Limit Mode When you choose Connection Limit as Action, you have to
choose Share or Each in addition to the number of packets
limits.
Share – It means the total IP addresses in a segment will be
limited with certain packets number per second.
Each –It means each IP will be limited with certain packets
number per second.
Next Group When you choose Block If No Further Match or Accept If
No Further Match as Action, you have to specify next IP
filter group for further matching.
Syslog Click Enable to make the history of firewall actions
appearing on the System Maintenance >> Syslog/Mail
Alert >> Syslog File.
Input Interface Choose one of the LAN or WAN profiles as data receiving
interface.
Output Interface Choose one of the LAN or WAN profiles as data
transmitting interface.
Time Schedule Time Object - Click the triangle icon
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
new time object profile.
Time Group - Click the triangle icon
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
new time group profile.
Advanced Setting – Check the box of Clear sessions when
schedule ON to clear the sessions when the above schedule
profiles are applied.
Service Protocol Service Type Object –Click the triangle icon
the profile selection box. Choose one or more service type
object profiles from the drop down list. The selected profile
197
to display the
to create another
to display the
to create another
to display