Draytek Vigor3900 User Manual page 273

Vigor3900 Series User's Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
WAN
Disconnection
WAN
Reconnection
VPN Disconnection
VPN Reconnection
Temperature
Router Reboot
CPU Usage
Memory Usage
TX Usage/RX
Usage
High Availability
Syslog
Apply
Cancel
4. Enter all the settings and click Apply.
5. A new notification object profile has been created.
Enable – When disconnection happened to WAN interface,
the router system will send the alert message to the
recipient.
Enable - When reconnection happened to WAN interface,
the router system will send the alert message to the
recipient.
Enable – When disconnection happened to a VPN tunnel,
the router system will send the alert message to the
recipient.
Enable - When reconnection happened to a VPN tunnel, the
router system will send the alert message to the recipient.
Enable - When the temperature is out of range, the router
system will send the alert message to the recipient.
Enable - When the router reboots, the router system will
send the alert message to the recipient.
Enable – When the CPU usage reaches a certain value, the
router system will send the alert message to the recipient.
Enable – When the memory usage reaches a certain value,
the router system will send the alert message to the
recipient.
Enable – When TX/RX usage reaches a certain value, the
router system will send the alert message to the recipient.
Enable – When such Vigor router becomes the "Master"
device in the application of HA, the router system will send
the alert message to the recipient.
Enable – Such notification will be recorded in Syslog.
Click it to save the configuration.
Click it to exit the dialog without saving the configuration.
265