Draytek Vigor3900 User Manual page 185

Vigor3900 Series User's Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
4 4 . . 3 3 . . 7 7 . . 2 2 B B G G P P C C o o n n f f i i g g u u
This page is used to configure the general settings for the host which is ready for using BGP.
Available parameters are listed as follows:
Item
Enable
Autonomous System
number
Router ID
Static Networks
After finished the settings, click Apply to save the configuration.
r r a a t t i i o o n n
Description
Check the box to enable BGP function.
Type the autonomous system number for the host in BGP
application.
The IP address typed here will be treated as identity for a
router in an autonomous system. In an OSPF autonomous
system, routers on both ends cannot be set with same router
IDs.
Define the IP addresses (forming network range) which
allow to be connected by other clients through static route.
Add – Click it to add a specified IP address and subnet
mask.
Save – Click it to save the settings.
Profile Number Limit - Display the total number of the
profiles to be created.
IP – Type the IP address.
Subnet Mask – Display subnet mask for the IP address
automatically.
177