Draytek Vigor3900 User Manual page 373

Vigor3900 Series User's Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Destination Port End
Load Balance Pool
H o w t o a d d a L o a d B
H o w t o a d d a L o a d B
1. Open VPN and Remote Access >>VPN TRUNK Management and click the Load
Balance Rule tab.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item
Profile
Enable
Protocol
Source IP Address
Source Mask
Destination IP
Address
Destination Mask
Destination Port
Start
Destination Port
End
Load Balance Pool
Display the end point specified in the Dest Port Range for
this entry.
Display the selection of load balance pool.
a l a n c e R u l e p r o f i l e
a l a n c e R u l e p r o f i l e
Description
Type the name of the profile.
Check this box to enable such profile.
Choose the protocol for such profile.
Type the source IP address specified for this profile.
Type the subnet mask address specified for the source IP.
Type the destination IP address specified for this entry.
Type the subnet mask address specified for the destination
IP.
Type the start point.
Type the end point.
Use the drop down list to choose one profile configured in
load balance pool. Then, such rule will be applied by the
pool.
365