Draytek Vigor3900 User Manual page 287

Vigor3900 Series User's Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Quota Reset
Frequency
Time Quota (min)
Current Time Used
(min)
Traffic Quota(MB)
Current Traffic
Quota (MB)
MAC Binding
FTP/SAMBA User Setting
Allow
FTP/SAMBA
Server Login
Radius User Setting
Allow Radius
Server Login
IPsec User Setting
XAuth
Apply
Cancel
4. Enter all the settings and click Apply.
5. A new User Profile has been created.
It is used to configure the cycle time for PPPoE quota. Note
that each time when the quota is reset, the value of Current
Time Used/Current Traffic Quota will be reset to initial
situation (0).
Everyday – The quota for PPPoE will be reset every day.
Everymonth – The quota for PPPoE will be reset every
month.
Type a time quota for PPPoE connection.
Note: The range of Time Quota is 1~14400 minutes.
Display the cumulative amount of time that the user used.
Reset - Click it to reset the setting to default value (0).
It is used to set the maximum traffic (MB) for such user
profile.
Display the cumulative amount of data traffic that the user
used.
Reset - Click it to reset the setting to default value (0).
Specify a MAC address which is limited and used for such
PPPoE account.
Enable – Click it to enable the function.
MAC Address – If MAC Binding is enabled, simply type
the MAC address of the router in this field.
Click Enable to allow the remote user accessing into
Internet via FTP/SAMBA server.
Click Enable to allow the remote user accessing into
Internet via Radius server.
Click Enable to allow the remote user accessing into
Internet via IPsec authentication.
Click it to save the configuration.
Click it to exit the dialog without saving the configuration.
279